Pillar Mounted Jib Crane with Magnet for Scrap Yard Material Handling
Short Video Description
This video shows a pillar mounted jib crane with magnet for outdoor steel scrap and ferrous material handling. The magnetic jib crane combines a fixed floor-mounted jib with an electromagnetic lifting magnet for picking up and moving steel scrap, plates, bars and other magnetic materials.
A pillar mounted jib crane, also called a pedestal jib crane or floor mounted jib crane, is installed on a fixed foundation and provides a dedicated lifting area around the supporting column. When equipped with an electromagnetic chuck, it becomes a magnetic jib crane suitable for localized scrap handling and loading operations.
For an outdoor scrap yard jib crane, the column, jib arm, slewing mechanism, magnet, electrical system and foundation should be designed according to the actual load, working radius, lifting height, outdoor environment and operating frequency.
Yuantai engineers can configure the jib crane with electromagnetic magnet according to the required lifting capacity, working radius, slewing angle, lifting height, magnet capacity and site conditions.
Main Technical Specifications
| Item | Technical Specification |
|---|---|
| Crane type | Pillar Mounted Jib Crane / Magnetic Jib Crane / Pedestal Jib Crane |
| Lifting capacity | 0.5 – 10 ton, customized according to application |
| Lifting attachment | Electromagnetic lifting magnet / Magnetic chuck |
| Working radius | 3 – 10 m, customized according to site layout |
| Lifting height | 3 – 10 m, customized |
| Slewing angle | 180° / 270° / 360°, according to jib crane design |
| Jib arm | Welded steel jib boom with engineered section and support structure |
| Hoisting system | Electric wire rope hoist / electric chain hoist / magnetic lifting system |
| Magnet control | Independent magnet controller with magnet ON/OFF control and status indication |
| Power supply | 380V / 50Hz / 3Ph standard; other voltage and frequency available |
| Control | Pendant control / Radio remote control |
| Duty class | ISO A3 – A5 / FEM 1Am – 2m, according to working frequency |
| Outdoor protection | Weather-resistant electrical components, protective coating and outdoor-rated equipment |
| Safety devices | Overload protection, upper limit switch, emergency stop, slewing limit and warning alarm |
| Installation | Floor-mounted foundation with anchor bolts or engineered base plate |
| Applications | Steel scrap yards, recycling plants, steel storage yards, fabrication yards, loading areas and outdoor ferrous material handling |
| Yuantai Crane engineering | Column, jib arm, slewing mechanism, magnet, electrical system and foundation loads are engineered as one lifting system. |
How Does a Pillar Mounted Magnetic Jib Crane Work?
A pillar mounted jib crane with magnet uses a vertical steel column to support the rotating jib arm. The electromagnetic magnet is suspended from the lifting system and can pick up ferrous material within the crane's working radius.
The operator positions the magnet above the steel scrap, energizes the electromagnetic chuck, lifts the material and slews the jib arm toward the required unloading position. The magnet is then de-energized when the material is positioned safely.
This arrangement provides a dedicated lifting point without requiring a full overhead crane system across the entire yard.
Why Use a Magnetic Jib Crane in a Scrap Yard?
A magnetic jib crane for scrap handling is useful when loads need to be picked up and moved repeatedly within a defined outdoor working area.
- Compact lifting solution for localized material handling
- Suitable for steel scrap and other ferrous materials
- 360° slewing available for broad working-area coverage
- Does not require a full overhead crane runway
- Suitable for loading and unloading areas
- Can be installed at fixed scrap handling stations
- Electromagnetic lifting allows fast pickup and release of steel material
- Working radius and lifting height can be customized
Magnetic Jib Crane vs Overhead Magnetic Crane
| Item | Magnetic Jib Crane | Electromagnetic Overhead Crane |
|---|---|---|
| Structure | Fixed pillar and rotating jib arm | Bridge crane with runway system |
| Working area | Localized circular or sector working area | Large rectangular crane coverage |
| Installation | Floor-mounted foundation | Building-supported or floor-supported runway |
| Magnet | Electromagnetic chuck | Electromagnetic chuck |
| Best suited for | Fixed scrap handling stations and loading points | Large steel yards and production facilities |
| Space requirement | Compact dedicated lifting zone | Requires crane runway and larger structural system |
How to Select a Pillar Mounted Jib Crane with Magnet?
The correct magnetic jib crane should be selected from the actual material and working area rather than the magnet capacity alone.
The key parameters include maximum steel load, working radius, lifting height, slewing angle, magnet capacity, material dimensions, working frequency, outdoor conditions and foundation arrangement.
For scrap handling, the shape and condition of the material also matter. Loose steel scrap, plates, bars and bundled materials may require different magnet configurations and lifting capacities.
Key Design Factors for an Outdoor Scrap Yard Magnetic Jib Crane
| Design Factor | Why It Matters |
|---|---|
| Maximum load | Determines the required crane and magnetic lifting capacity. |
| Working radius | Determines the jib arm length and required foundation stability. |
| Lifting height | Determines the column height and required hook position. |
| Magnet capacity | Must match the type, size and condition of the ferrous material. |
| Slewing angle | Determines the available material pickup and unloading area. |
| Working frequency | Affects the duty class and mechanical/electrical configuration. |
| Wind conditions | Important for outdoor column, jib and foundation design. |
| Foundation | Must withstand crane reactions, overturning moment and operating loads. |
How Yuantai Designs a Magnetic Jib Crane for Scrap Handling
Yuantai engineers review the pillar, jib arm, slewing system, magnetic chuck, electrical controls and foundation as one complete system.
- Confirm maximum lifted steel scrap weight
- Determine required working radius
- Calculate lifting height and hook position
- Select the appropriate electromagnetic magnet
- Check jib arm strength and deflection
- Calculate column loads and overturning moment
- Check foundation and anchor bolt requirements
- Select outdoor electrical protection
- Configure magnet control and safety functions
- Match the crane duty class with actual working frequency
This approach helps ensure that the outdoor magnetic jib crane is designed for the actual scrap yard conditions rather than based on crane capacity alone.
Typical Applications of Magnetic Pillar Jib Cranes
A pillar mounted jib crane with electromagnetic magnet can be used for:
- Steel scrap yard material handling
- Metal recycling plants
- Steel plate loading and unloading
- Steel bar handling
- Scrap sorting areas
- Truck loading and unloading
- Steel storage yards
- Fabrication yards
- Outdoor material transfer stations
FAQ: Pillar Mounted Jib Crane with Magnet
Common questions about magnetic jib cranes, electromagnetic lifting magnets, outdoor scrap yard handling and pedestal jib crane design.
1. What is a pillar mounted jib crane with magnet?
A pillar mounted jib crane with magnet is a floor-mounted jib crane equipped with an electromagnetic lifting magnet. It is designed to pick up and move ferrous materials such as steel scrap, plates, bars and other magnetic loads.
The fixed pillar supports the jib arm, while the jib slews around the column to provide a dedicated lifting area.
2. Can a magnetic jib crane be used outdoors?
Yes. A magnetic jib crane can be designed for outdoor scrap yards, steel storage areas and recycling plants.
Outdoor design should consider rain, dust, temperature, wind, corrosion protection and electrical enclosure requirements. The column and foundation must also be designed for the actual environment and operating loads.
3. What materials can a jib crane with electromagnetic magnet lift?
An electromagnetic magnet is mainly used for ferrous magnetic materials, including steel scrap, steel plates, bars, billets and similar steel products.
The actual lifting capacity depends on the magnet design and the material's size, shape, thickness, temperature and surface condition.
4. How large can a pillar mounted magnetic jib crane be?
The crane capacity and working radius are determined by the actual application. Small magnetic jib cranes can serve localized handling stations, while larger pedestal jib cranes can be engineered for heavier outdoor steel handling.
Yuantai engineers calculate the jib arm, column, slewing mechanism and foundation according to the required load and working radius.
5. What information is needed for a magnetic jib crane quotation?
Provide the lifting capacity, working radius, lifting height, slewing angle, maximum steel load, material type, magnet requirements, working frequency, outdoor conditions and foundation information.
Photos or a simple site drawing showing the pickup and unloading positions can help Yuantai engineers select the correct pillar mounted jib crane configuration.
6. Is a magnetic jib crane suitable for loading trucks with steel scrap?
Yes. A properly designed outdoor magnetic jib crane can be installed beside a truck loading area to move steel scrap between storage, sorting and loading positions.
The required working radius, lifting height, slewing range and magnet capacity should be checked against the actual truck and material layout.
7. What experience does Yuantai Crane have with magnetic jib cranes?
Yuantai Crane has engineering experience with pillar mounted jib cranes, pedestal jib cranes, electromagnetic lifting systems, overhead magnetic cranes and steel material handling equipment.
For a magnetic jib crane project, Yuantai engineers review the column, jib arm, slewing mechanism, electromagnetic chuck, electrical control system, foundation and actual material handling conditions together.
Need a Pillar Mounted Jib Crane with Magnet?
Send us your lifting capacity, working radius, lifting height, slewing angle, steel scrap weight, magnet requirements, working frequency and site layout.
Yuantai Crane can engineer a pillar mounted jib crane, pedestal jib crane or outdoor magnetic jib crane with an electromagnetic lifting magnet for steel scrap yards, recycling plants, steel storage areas and other ferrous material handling applications.
Related Videos
- 20 Ton Overhead Crane for Steel Coil Lifting with Electromagnetic Coil Lifter
- Electromagnetic Overhead Crane with Beam Spreader for Billet Lifting
- Rotary Beam Spreader with Magnets for Long Steel Plate & Rebar Handling
- Pillar Mounted Jib Crane with Magnet for Scrap Yard Material Handling
- Electromagnetic Overhead Crane Power Failure Safety | Magnetic Crane
- Double Girder Overhead Crane with Electromagnetic Chucks | Scrap Handling Crane
Article by Bella ，who has been in the hoist and crane field since 2016. Bella provides overhead crane & gantry crane consultation services for clients who need a customized overhead travelling crane solution.Contact her to get free consultation.
Yuantai Cranes
Yuantai Cranes - Global Material Handling Crane Solution Provider & Manufacturer with CE, ISO, SGS, CNEX and other Third Party Certifications.
- Main Specifications - Capacity: 0.5–550 tons | Span: up to 40m | Speed: 0.8–12 m/min | Duty: A3–A7 | Power: 380–690V, 50/60Hz | Control: pendant/remote/cabin
- Full engineering: FEA/PLC/VFD + in-house build + global delivery + on-site support, for workshops, factories, EPC contractors, industrial projects, etc.
- Support: design, manufacturing, testing, service – end-to-end, customized lifting solutions worldwide.
Get Your Custom Quote – Quick & Easy
Fill in what you know. Skip what you don't – we'll help.
- Crane type:_____ . (e.g., overhead crane, gantry crane, jib crane)
- Max weight to lift:_____ tons. (e.g., 2t, 5t, 10t, 20t, 50t)
- Lifting height:_____ m. (How high does the hook need to reach?
- Workshop width (span):_____ m . (Distance between the two crane rails)
- Travel distance:_____ m . (How long does the crane need to move along the runway?)
- Control type:_____. (Pendant / remote / cabin Control)
- Power supply:_____. (Local voltage & frequency – e.g., 380V, 50Hz, 3-phase)
- What will it be used for?_____ (e.g., steel fabrication, concrete products, mold handling, general manufacturing, etc.)
- Any special requirements?_____ (e.g., extreme temperature, dusty or explosive environment, special paint color, etc.)
Just leave a message via the contact form and our hoist and crane engineer will contact you with in 24working hours.
Inquire Yuantai Cranes