Jib Crane Kit for Sale – Industrial Jib Cranes 1 Ton to 10 Ton
Top Benefits, Key Considerations, and Who Should Buy Jib Crane Kits Without Steel Structures

Jib Crane Kit for Sale. Check Top Benefits, Key Considerations & Who will Buy Jib Crane Kits with no arm / column,.Get economical Industrial Jib Crane kit!

Introduction: What Is a Jib Crane Kit (Excluding Steel Structures)?

What Is a Jib Crane Kit?

A jib crane kit is a set of components used to build a fully working jib crane.But here's the key—this type of kit does not include the main steel structures, like the jib arm or the column.

That part is made by the buyer, usually at their own workshop or through a local steel fabricator.The kit does include all the other important parts. Once assembled with your own steel structure, it works just like a complete jib crane.It's ideal for buyers who want to save on shipping costs, or who already have the ability to handle fabrication locally.

pillar mounted jib crane kit for sale

wall mounted jib crane kit for sale

wall travelling jib crane kit for sale

What's Included in the Kit?

Everything you need to make the crane operate—except the main arm and pillar.

Here's what's typically included:

• Electric or manual hoist
  For lifting and lowering the load. You can choose based on your needs.
• Trolley mechanism
  Allows the hoist to move along the jib arm.
• Slewing system or bearing assembly
  Helps the crane arm rotate. Manual or motorized options are available.
• End stops and travel limiters
  For safety and to keep the hoist or trolley from going too far.
• Electrical system
  Includes cables, festoon system, and control panel. It connects everything and powers the hoist and rotation system.
• Push button pendant or remote control
  To let the operator control the crane from a safe distance.
• Installation instructions and technical drawings
  These help your team install the components correctly and safely.

What's Not Included in the Kit?

This kit does not come with any heavy steel structures. These need to be made or sourced locally.

Specifically, the following parts are not included:

• Jib arm (also called the boom or main beam)
• Pillar or base column
• Wall brackets or supports
• Foundation bolts or base plates
• Any concrete work or structural anchoring materials

Why? These parts are heavy and bulky to ship. It's much easier and more cost-effective for many buyers to handle this locally.

Special Note

If you don't have local fabrication support, we can also provide the full steel structure—including the jib arm, column, and base plate—based on your exact requirements. Just let us know your specifications, and we'll quote the full package for you.

Who Should Consider Buying a Jib Crane Kit (Without Steel Structures)

Not every buyer needs a full jib crane with all the steelwork included. For many, a jib crane kit without steel structures is a smarter and more flexible choice.

Here's who should seriously consider this option:

Buyers with Local Fabrication Capability

If you or your team can handle basic steelwork, this kit is a great fit.

• You can make the jib arm, column, and base locally
• This gives you more control over materials, size, and structure
• It's ideal for factories with existing welding and fabrication shops

International Clients Who Want to Cut Shipping Costs

Steel parts are heavy. Shipping them overseas can be expensive.

• By sourcing only the components, you reduce shipping volume and weight
• You also avoid customs issues related to oversized steel structures
• This is a good option if your project budget is tight or if you're handling multiple units

Project Managers or Contractors with In-House Assembly Teams

If your team already handles equipment installation or mechanical work, a kit makes sense.

• You get flexibility in how and when to install
• No need to wait for custom steel parts to arrive
• You can schedule your project around your own timeline

OEMs and System Integrators

If you're building a larger system and the jib crane is just one part of it, a kit gives you more options.

• You can design the structure to fit your own machine or plant layout
• It works well for custom integration with automation, conveyors, or special machines

Buyers in Remote Areas

In some locations, it's just not practical to ship long or bulky steel components.

• Transporting a large column or beam can be costly or delayed
• Local fabrication can be faster and easier
• You still get all the core crane components with clear instructions

This kind of jib crane kit offers flexibility, cost savings, and practical benefits for many buyers.
If any of the above situations sound like yours, it's worth considering this setup.

Types of Jib Crane Kits Available

Jib crane kits come in several types to fit different working conditions. Even though the steel structure is not included, you'll choose the kit based on how the crane will be mounted, the type of hoist, and the rotation mechanism. Below are the main types to consider:

By Mounting Style

(The steel structure—arm, column, or brackets—will be built locally by the buyer)

• Free-standing jib crane kits
  For floor-mounted installations with a full-height column and rotating arm. Ideal when no support from walls or ceilings is available.
• Wall-mounted jib crane kits
  Arm is mounted to an existing wall or post. Saves floor space. Suitable for lighter loads and short span applications.
• Wall-traveling jib crane kits
  Runs along a track fixed to a wall or column. Allows movement along a line—useful in production lines or maintenance areas.
• Articulating jib crane kits
  Comes with two pivot points for better reach around obstacles. Great for tight spaces or workstations that need flexible coverage.

By Hoist Type

(Choose based on lifting capacity, usage frequency, and budget)

• Electric chain hoist
  Most common option. Simple, reliable, and good for light to medium loads.
• Electric wire rope hoist
  For heavier loads or frequent lifting. Offers smoother operation and longer duty cycles.
• Manual chain block
  For occasional lifting or areas without power supply. Low-cost solution, but slower to operate.

By Rotation Mechanism

(How the jib arm rotates)

• Manual slewing
  Simple and cost-effective. The operator pushes the arm by hand. Suitable for lighter loads and shorter spans.
• Motorized slewing
  Powered rotation with motor, limit switches, and control panel. Needed for heavier loads, longer arms, or frequent use.

Each type can be tailored further depending on your lifting needs, working space, and installation setup. If you're not sure which one fits best, we can help match the right type for your project.

Common Capacities and Technical Parameters

When choosing a jib crane kit, it's important to understand the typical lifting capacities and key performance specs. These help you plan the steel structure and choose the right hoist for your job.

Standard Lifting Capacities

Most jib crane kits are designed to support these common capacities:

• 250 kg – Light-duty workstations
• 500 kg – Light assembly or maintenance use
• 1 ton – General workshop and factory use
• 2 ton – Moderate lifting, ideal for parts and equipment handling
• 3 ton – Mid-range lifting needs
• 5 ton – Heavy-duty shop or production line work
• 10 ton – High-capacity jobs, often for industrial environments

If your lifting need falls between these sizes, a customized kit may be available.

Rotation Angle Support

The rotation range depends on the mounting type and how the jib arm is installed:

• 180° – Common for wall-mounted or fixed-arm designs
• 270° – Often used in wall-mounted and some limited-space column-mounted setups
• 360° – Full rotation for free-standing floor-mounted types

Choose the rotation angle based on your workspace and material handling flow.

Trolley Travel and Lifting Height

These depend on how your steel structure is built and the hoist you choose:

• Trolley travel: Determined by the length of your jib arm
• Lifting height: Based on pillar height, hoist size, and headroom needed for your job

We provide clear dimensions and hoist specs, so your local fabricator can design accordingly.

Top 5 Advantages of Buying Jib Crane Kits Without Steel Structures

Buying a jib crane kit without the heavy steel parts isn't just a cost-saving move—it also gives you more control and flexibility. Here are the top five reasons buyers choose this option:

Cost Savings on Shipping and Steel Fabrication

One of the biggest benefits is the savings on transport and materials.

• The heaviest items—the jib arm and column—are made locally
• This cuts down on international freight charges, which can be high for long or bulky items
• Local steel is often cheaper, and you avoid import duties or special handling fees

Flexibility in Structural Design

You're not stuck with a one-size-fits-all frame.

• Adjust the arm length, mounting height, and rotation angle as needed
• Design the steel structure to match your workshop layout or ceiling height
• Works well for custom-built facilities or non-standard workspaces

Faster Lead Times and Easier Logistics

Kits are much easier to move and store than full crane systems.

• Smaller packages ship faster and are easier to handle at your site
• You avoid delays caused by oversized cargo or customs clearance
• Installation can begin as soon as your local fabrication is ready

Easier Compliance with Local Building Codes

Every region has its own construction and safety rules.

• Local fabrication means the support structure can be built to match local code
• You can work with local engineers who already understand your country's standards
• This reduces approval time and helps pass inspections without extra work

Scalability for Repeat Projects or Multiple Units

If you need more than one crane, this setup makes it easy to scale.

• Use the same kit across different sites, just fabricate the steel parts locally
• Reduces production cost for OEMs and contractors handling multiple facilities
• Helpful for franchise factories, workshop chains, or national-level projects

What to Consider Before Buying a Jib Crane Kit

Before purchasing a jib crane kit, there are several factors to think about. These details will ensure your crane works safely and efficiently for your needs.

Your Structural Fabrication Capability

Can you or your team fabricate the steel structure?

• If you have a local workshop or contractor with steel fabrication skills, a kit without the steel parts is a good fit.
• If you need help with fabrication, make sure you can get the right expertise to build the column, arm, and base securely.

Accurate Dimensions and Load Requirements

Make sure to confirm the details before placing your order.

• Boom length: This will affect the coverage area.
• Load capacity: Choose the right lifting capacity based on the heaviest load you need to handle.
• Rotation range: Depending on your workspace, you may need 180°, 270°, or 360° rotation.

Double-check your needs to avoid errors later.

Foundation and Mounting Support

The column or wall needs to handle the crane's load.

• Column support: Make sure the foundation can handle the crane's weight and forces.
• Wall support: For wall-mounted cranes, check that the wall is strong enough for the load.
• Have an engineer calculate load distribution to ensure safe operation.

Power Supply and Control Preferences

The power and control system affect how your crane will operate.

• Voltage: Ensure the hoist and electrical system match your local power supply.
• Hoist speed: Choose the speed that fits your work processes (slow for precision, fast for high volume).
• Control method: Decide between pendant control (manual push-button control) or remote control (wireless operation).

Indoor or Outdoor Environment

The crane will need protection depending on where it's used.

• For outdoor environments, choose weatherproof hoists and corrosion-resistant materials.
• For indoor use, ensure the components are suited for dust, moisture, or other factors in your facility.
• IP-rated enclosures for electrical systems are important to prevent damage in harsh conditions.

Taking the time to consider these factors helps avoid delays or mistakes. Make sure everything is ready before you order, and your crane will meet your needs perfectly.

Common Mistakes to Avoid

Buying a jib crane kit without the steel structures is a good option, but there are a few common mistakes to avoid. Here's what you should watch out for:

Assuming the Kit Includes Steel Structures Like Arms or Columns

Don't forget that a jib crane kit without steel structures only includes the components like the hoist, trolley, and control system.

• Steel structures (like the arm and column) need to be fabricated locally.
• Double-check the kit contents to make sure you understand what's included.

Ordering Incorrect Hoist Capacity or Control Voltage

It's easy to misjudge your needs when it comes to lifting capacity or power.

• Hoist capacity: Make sure the hoist can handle your heaviest load.
• Voltage: Confirm the hoist's voltage matches your local power supply.
• Ordering the wrong specs can lead to slow performance or safety issues.

Underestimating the Complexity of Structural Fabrication

Even though you're buying a kit, fabricating the steel structure is not always simple.

• Be sure you or your contractor have the skills and equipment for fabrication.
• You may need to factor in extra time or costs for welding, assembly, and installation.

Not Verifying Compatibility Between Fabricated Parts and Supplied Components

The kit's components need to match your fabricated parts.

• Make sure the mounting points on the steel structure match the trolley and hoist fittings.
• Double-check the dimensions and weight of fabricated parts to ensure everything will fit together properly.

Overlooking Electrical Connection Standards or Local Codes

Every region has its own electrical and safety standards.

• Electrical systems: Ensure that wiring, connections, and enclosures meet local requirements.
• Local building codes: Your local engineer or contractor should verify that the crane system complies with safety regulations.

By avoiding these mistakes, you'll ensure the crane kit works smoothly, saves you time, and operates safely.
Planning carefully upfront makes the whole process much easier!

Where These Kits Are Commonly Used

Jib crane kits are highly versatile and can be used across different industries and work environments. Here are some common places where these kits are ideal:

Manufacturing Lines with In-House Maintenance Teams

• These kits are perfect for manufacturers who need to lift and move equipment around their shop floors.
• In-house teams can easily assemble the crane and adapt it to specific production lines.

Machine Shops Needing Station-Specific Material Handling

• Machine shops often need a flexible, localized lifting solution.
• Jib crane kits can be set up at individual workstations for handling tools, parts, or heavy machinery.

Overseas Buyers Sourcing Parts for On-Site Crane Fabrication

• Overseas buyers often prefer this kit to reduce shipping costs.
• They can get the hoist, trolley, and electrical systems shipped and fabricate the steel structure on-site to match local needs.

Warehouses, Truck-Loading Zones, and Dock Areas

• Jib crane kits work well in warehouses or loading zones for moving pallets, boxes, or heavy materials.
• The cranes are compact and perfect for lifting in narrow aisles or tight spaces.

Energy Plants, Steel Shops, and Modular Construction Projects

• For energy plants or steel shops, jib cranes are used to lift heavy equipment, tools, or materials in tough environments.
• Modular construction sites use these kits to move building components and materials around for assembly.

These kits are widely used in settings where flexibility, local fabrication, and fast installation are needed. Whether it's a small machine shop or a large energy plant, jib crane kits help get the job done efficiently.

Installation and After-Sales Support

After purchasing your jib crane kit, it's essential to know that installation and ongoing support are well-covered. Here's what you can expect when it comes to setting up the system and maintaining it over time:

Installation Drawings and Wiring Diagrams

• Every jib crane kit includes detailed installation drawings that provide a step-by-step guide for assembling the crane.
• These drawings cover key aspects such as how to mount the hoist, trolley, and column, as well as how to install the electrical wiring.
• Wiring diagrams are also included to help your team or contractor properly connect all electrical components. These diagrams show how to wire the control panel, hoist motor, and any additional control systems like limit switches or pendant controls.
• Dimensional drawings are provided to ensure the steel structure you fabricate is compatible with the kit's components.

Optional Video Guidance or Remote Technical Support

• In addition to written instructions, video guidance is often available, providing a visual walkthrough of the assembly and installation process.
• For any challenges you face during the installation, remote technical support can be accessed through a phone call or video conference.
• Our experienced technicians can guide you through the entire installation process, answering any questions or troubleshooting any issues that arise in real-time. This support ensures that you get the most out of your crane kit without any unnecessary delays.

Spare Parts Available

To keep your crane in top condition, spare parts are readily available. You can easily order essential components such as:

• Hoist motors: Replacement or backup hoists in case of wear and tear.
• Push buttons: For the control panel if any buttons stop working or become damaged.
• Festoon systems: These are key for providing power to the crane's trolley and hoist.

Having access to spare parts ensures that you don't experience unnecessary downtime, as you can quickly replace faulty components to keep operations running smoothly.

Third-Party Inspection Reports and CE/ISO Certificates

• All jib crane kits are thoroughly tested before shipping, and you can request a third-party inspection report to verify that all components meet safety and quality standards.
• For international buyers, the kit will come with CE certificates, showing that it complies with European Union safety standards, and ISO certifications, confirming that the crane meets international quality management standards.
• These certifications provide peace of mind, proving that your crane is not only high-quality but also safe and reliable for long-term use.

With all these resources, you can be confident that your jib crane kit will be easy to install, operate, and maintain. You won't be left alone during or after the installation—help is available whenever you need it.

Conclusion: Is a Jib Crane Kit (Without Steel Structures) Right for You?

If you're considering a jib crane kit without steel structures, it's likely because you need a flexible, cost-effective solution that fits your unique needs. Here's a quick recap to help you decide if this kit is the right fit for you:

Key Factors to Consider

• Local Fabrication Capability: If you have access to local steel fabrication (either in-house or through a trusted partner), you can easily handle the construction of the jib arm and pillar. This will save you on shipping costs for heavy steel parts and allow you to tailor the steel structure to your exact specifications.
• Cost-Effective: By excluding the steel structure from the kit, you significantly reduce the overall cost of shipping bulky steel parts. This makes it an attractive option for companies that want to save on freight charges, especially for overseas buyers.
• Customizability: You can modify the arm length, column height, and mounting style to perfectly suit your workspace and lifting needs. With this flexibility, you're not confined to one-size-fits-all options.
• Modularity: The kit's pre-engineered components allow you to build and assemble the crane locally, making it easy to scale up or modify for future projects. It's also a great choice if you plan to install several identical cranes across multiple locations.
• Hands-On Control: Purchasing this type of kit allows you more control over the final structure. You can adapt it to local regulations, tailor it to specific workflows, and handle any future upgrades or adjustments on your terms.

Ideal for Businesses That:

• Have local workshops capable of handling the fabrication of the steel structure.
• Want a modular system that can be adapted and scaled for future projects.
• Are looking for a cost-effective solution to save on shipping costs and reduce overall expenses.
• Need a customizable crane solution that fits within specific dimensions or operations.

In conclusion, if your business has the right fabrication capabilities and you need a flexible, high-performance, and cost-effective lifting solution, a jib crane kit without steel structures is an excellent choice. It gives you the freedom to customize the crane and save on shipping costs while still enjoying all the benefits of a fully functional lifting system.

How to Get a Tailored Quotation

To receive a personalized and accurate quote for your jib crane kit, it's important to provide detailed information about your specific requirements. Here's what we need to know to give you the best quote possible:

Desired Lifting Capacity, Boom Length, and Working Height

• Lifting Capacity: Tell us the maximum weight your crane needs to lift.
• Boom Length: Specify how far the jib arm should extend. This affects both the reach and the crane's overall footprint.
• Working Height: Let us know how high the crane should lift. This is the clear height from the floor to the highest point the crane should reach.

Power Supply and Preferred Hoist Type

Power Supply: Confirm the voltage and phase of your local electrical supply. This ensures that the hoist, control system, and other electrical components match your power source.

Hoist Type: Choose the hoist type that best suits your application. Options include:

• Electric chain hoist
• Electric wire rope hoist
• Manual chain block (for lighter or infrequent use)

Layout Drawings or Structural Dimensions

• Provide any layout drawings or structural dimensions of your workspace. This will help us determine the best mounting method and ensure the crane fits your facility's setup.
• If you have a custom fabrication design in mind, share those dimensions as well.

Indoor or Outdoor Use

Confirm whether the crane will be used indoors or outdoors.

• If the crane will be used outdoors, make sure to specify whether it needs to be weather-resistant or corrosion-resistant for durability.
• If used indoors, we'll recommend appropriate enclosures and dust-proof features.

Once you provide all this information, we can give you an accurate, tailored quotation based on your specific requirements. This ensures you get the right jib crane kit for your application, without any guesswork or unnecessary costs.

Feel free to reach out with your details, and we'll get started on providing you with the best possible quote for your needs!